standOUT™ Metals

Create a dynamic display with standOUT™ Metals. Two images, each printed on metal, are mounted together to create an eye catching display. Available in standard and circle combinations.

Service Time

2-3 Days
100% rush available

Minimum Order

$10.00 minimum per order

Shipping Info

Features

standOUT™ Metals are available in 10 options, from 16x16 to 24x24.
Created by directly infusing the image into an aluminum sheet using a sublimation process.
Aluminum is approximately .045" thick.
The metal prints are are mounted together using a 3/4" aluminum bracket. The front image is mounted in the center of the back print.
Corners are rounded for a polished look.
Available in your choice of four surfaces.
The back of the metal is a brushed metal.

Please note: Due to the nature of this product, minor surface imperfections such as bubbles or bumps may appear. We will make every effort to place the image so that imperfections are as inconspicuous as possible. Remakes are not available due to imperfections in the product.

Metal Surfaces

High Gloss Brushed

With the Brushed surface, the texture of the aluminum shows, giving the image a softly brushed appearance, and the metallic color shows through. The lighter the image, the more pronounced the effect. The high gloss surface allows the print to reflect light, for a glossy appearance.

Formerly Brushed Metal.

High Gloss Vibrant

The aluminum has a white base for the image, so that all colors are vividly displayed. The high gloss surface allow the metal print to reflect light, for a glossy appearance.

Formerly High Gloss.

Matte Brushed

Not available on Circle standOUT™ Metals.

Matte Vibrant

The aluminum has a white base for the image, so that all colors are vividly displayed. The matte surface is non-reflective.

Not available on Circle standOUT™ Metals.

Display Options

Standard Mount Kit

An aluminum bracket attached to the back of the metal prints allows the image to hang 1/8" from the wall. Clear protective wall bumpers are placed on the four corners of the metal print.

Float Mount Kit

An 3/4" aluminum bracket allows the metal print to float off the wall. Clear protective wall bumpers are placed on the four corners of the bracket.

Additional Options

Scalloped Corner

An alternative to the standard rounded edges, scalloped corners can give your metal print an architectural finish. Scalloped corners can be applied to the front, back or both images.

Drilled Holes

Create metal collages by clipping several metal prints together, a great way to display multiple images, or a single image across several metal prints. Drilled holes are ¼"; order drilled holes in the top, bottom or all corners depending on where the image will hang in the collage. Use the Hanging Clips (below) to attach images.

Hanging Clips

Use these clips to attach multiple metal prints to create a collage.

Microfiber Cleaning Cloth

For cleaning metal prints, using a microfiber cloth is recommended. This white velour microfiber cloth measures 8x12.

To create a standOUT™ Metal, use the two templates for the sizes of the front and back images. Make sure that all important elements on the back image are not covered by the front image.

Standard Metal Prints

Circle Metal Prints

* Recommended for this product

Full Color Ordering System

Download Software

Ordering through the FOS software's easy-to-use interface allows you to order prints and units, as well as order from multiple images at once.

Client side software
Pre-designed templates
View pricing as you order
FREE software

ROES